Forum

[SuperEa]

I'm expecting it to calculate weight of money against one side back or lay depending on what values iv inputted.
As far as i can see its just placing default bets at the time its allocated on any runner under the min max price ignoring the weight of money values iv asked it to look for.
if you run it with massively low weight of money values or high it still does the same bets so clearly its not following weight of money.

[BfBotManager]

Your rule is to allow betting on selections whose Back side amount is less than 100 x Lay side amount, where Lay side individual amounts are also multiplied by 90. So this is satisfied in almost all cases for all selections. You need to calculate amounts manually to understand how this works.

Try turning off option to use advanced settings for start, it might be easier to understand. Then formula will be a simple one:
1 x Back side amount <= 100 x Lay side amount

If Back side is 100 GBP and Lay side amount is 200 GBP, then your condition will allow betting on selections where 100 GBP is less than 200 x 100 = 20,000 GBP, which is obviously satisfied for all selections.


If you set formula to be "3 x Back side amount <= 1 x Lay side amount" and selection has 100 GBP on Back side and 200 GBP on Lay side then formula will be:
3 x 100 GBP <= 1 x 200 GBP, that is 300 GBP <= 200 GBP so betting will NOT be allowed on that selection.

But if selection has only 50 GBP on Back side then formula will be
3 x 50 GBP <= 1 x 200 GBP, that is 150 GBP <= 200 GBP so betting will be allowed on that selection.

Available amounts change as bets are placed on selections, so it is possible that this rule is satisfied in one moment and in next secon is not, so be careful when testing it.

[SuperEa]

Can you email me some example files to use as I’m not convinced this will work

[BfBotManager]

Can you email me some example files to use as I’m not convinced this will work

We are sorry but we do not have any other examples and we already explained how this rule works. You now need to decide if this will work for your strategy or not.

[SuperEa]

Hi iv added a weight of money condition to the conditions on a strategy I'm sending you, but its not recognising the weight of money as when I take it out and just leave steamer or drifter condition on it fires at exactly the same time as the other strategy.
I want the strategy to recognise the drift or steam then check for weight of money.

[BfBotManager]

All strategy rules must be satisfied for selection before bet can be placed.

We do not see any problem with your strategy.

Try adjusting your strategy settings until you get behavior that you want.

[SuperEa]

I will now send you 2 strategies 1 with weight of money and 1 without
I guarantee both will trigger at the same time.

[BfBotManager]

They will bet on same selection as your WOM rule is satisfied all the time. Try turning off WOM rule advanced settings, keep it simple.

Try to do more tests in simulation mode, allow betting on all selections, not just first two favorites. Remove price change rule and min/max price rule too for test purpose in simulation mode. Then you will see some differences.

[SuperEa]

I only practice in real mode.
So you are saying I have the arrows pointed wrong for weight of money?

[BfBotManager]

What arrows? Please post screenshot and mark arrows that you are talking about. Thanks.

[SuperEa]

Other then weight of money is there another condition i can use which monitor's money

[BfBotManager]

Other then weight of money is there another condition i can use which monitor's money

No, there is not.