Percentage of bank staking sequence not working.
Posted: Sat Sep 03, 2022 6:01 pm
by danielreese
For some reason the staking sequence is not activating. I thought it was the position of it in the stake instructions but it's still not working. Any help would be massively apprecaited.
Strategy attached.
Re: Percentage of bank staking sequence not working.
Posted: Mon Sep 05, 2022 11:16 am
by Lazo
Hi Daniel,
We tried to reproduce this, but the "Percent of betting bank" staking plan is called from your strategy.
Please, can you share with us more information about the problem that you have?
You can contact us through a support ticket (
https://www.bfbotmanager.com/en/contact).
Re: Percentage of bank staking sequence not working.
Posted: Mon Sep 05, 2022 1:54 pm
by danielreese
Hi! Yes, you're right, the Percentage of Bank does work, but the Simple Sequence Overall P/L portion isn't executing. I would like it to place a back bet of 0.1% Percentage of Bank, then increase with each loss with the following percentage; 0.1, 0.15, 0.23, 0.34, 0.51, 0.76, 1.14, 1,71, 2.56, 3.84, 5.77, 8.65, 12.97, 19.46. There is a message within the Simple Sequence Overall P/L screen that says you must have a Percentage of Bank in place for it to work.
Re: Percentage of bank staking sequence not working.
Posted: Mon Sep 05, 2022 5:14 pm
by BfBotManager
At Percentage of betting bank staking plan you did not tick option to use percentage from another staking plan. Please use simulation mode to test it and try again.