Page 1 of 1

Problem getting greyhound FC to fire

Posted: Sun Jan 05, 2020 3:19 pm
by DaveJessop2112
I'm trying to get a bot set up to lay specific trap forecast combinations but it won't fire whatever I do

Dog fc markets are loaded
Min max overrounds have been changed to back 100%-130% and lay 70%-100% ( both met according to Betfair market)
FORECAST selected in markets filter
Max ratio between back and lay changed to 25%
Bet type by runner position set to 1 for traps 1-2 in this example
Odds set to 10-100

Re: Problem getting greyhound FC to fire

Posted: Sun Jan 05, 2020 6:22 pm
by BfBotManager
Hi Dave,

Min/max number of runners is wrong as this is checking number of selections at market, not actual number of greyhounds. Please remove it or change it to 30 selections, as that is how many forecast market has.

Then try again in simulation mode. Also set stake to higher value, as 0.01 bet might be rejected by Betfair.

Re: Problem getting greyhound FC to fire

Posted: Sun Jan 05, 2020 6:49 pm
by DaveJessop2112
Yes - I'm a muppet :D
Thanks for your help

Re: Problem getting greyhound FC to fire

Posted: Sun Jan 05, 2020 7:31 pm
by DaveJessop2112
Working well now - even at 1p stakes - had to change the back/lay ratio to 50% though

Going to see how it runs for 200-300 races and maybe tweak a little

Re: Problem getting greyhound FC to fire

Posted: Tue Mar 05, 2024 6:07 pm
by Smeato
Good evening I've downloaded your bott,can you please help me out as I'm new to this what traps does the bott pick.