Trap 2
Posted: Sat Jul 20, 2019 6:49 pm
by murdok
I made a strategy to lay a trap 2 in the horses in the uk races but I do not know why the boot does not fire
however I have a similar strategy in greyhound and it works well do you have any idea what might be going on?
Re: Trap 2
Posted: Sat Jul 20, 2019 7:25 pm
by BfBotManager
Horse name probably does not contain text 2 in its name. Try instead using "Filter horses by detailed information" rule to check stall draw instead.
You should not use two rules to set bet type, remove one of them. Setting bet type is explained in following article:
https://help.bfbotmanager.com/article/4 ... -to-bet-on
Please use simulation mode to test this.
Re: Trap 2
Posted: Sat Jul 20, 2019 8:19 pm
by murdok
i will try that thx
Re: Trap 2
Posted: Mon Jul 29, 2019 5:47 am
by Winx19
Hi Murdok
Looking at your selection filter you have - Allow betting on selections whose name contains one of the following values. 2. - That works for greyhounds.
Shouldn't you be selecting filter horses by detailed information and select stall number.
Sorry Rade posted it above.